6G Celicas Forums

Welcome Guest ( Log In | Register )

> Stalling / Rough Idle / Hesitation / Stumble, Updated: CEL Code 31
post Feb 2, 2007 - 1:04 AM
+Quote Post
d3monc3lica



Enthusiast
**
Joined Aug 19, '04
From Maine
Currently Offline

Reputation: 0 (0%)




OK, so about a week or so ago i posted a topic about how my car wouldnt start, and i figured out it was to do with my ground wires. Now, something odd is happening.

1. If i start my car, it warms up fine but eventually will just die, stall right out.

2. If i start my car and drive, it will drive a ways (random), then act as if i pulled a terminal off of my battery, it will just have no power AT all as if it is going to stall out, but since i am in gear and still driving it doesnt completely shut off, this will happen over and over again for about....10-15 seconds at a time and then stop. Normally happens once per trip, but its random sometimes..... Any ideas as to what could cause this, i just regrounded 2 grounds on the side near my battery (one big, one small), but i still have no clue what could make my car loose power like that, and only for an instant. I have a SAFC 2 and i dont see any dips in voltage......

This post has been edited by d3monc3lica: Feb 4, 2007 - 1:48 PM
 
Start new topic
Replies
post Feb 4, 2007 - 1:39 PM
+Quote Post
d3monc3lica



Enthusiast
**
Joined Aug 19, '04
From Maine
Currently Offline

Reputation: 0 (0%)




31 Air Flow Meter Signal.

OK so now what do i check?

Posts in this topic
- d3monc3lica   Stalling / Rough Idle / Hesitation / Stumble   Feb 2, 2007 - 1:04 AM
- - pure_dx   sounds like your alternator or battery is going ou...   Feb 2, 2007 - 2:30 AM
- - hurley97   check the connections to the battery. make sure th...   Feb 2, 2007 - 10:18 AM
- - d3monc3lica   Yeah but my SAFC doesnt show a dip in voltage when...   Feb 2, 2007 - 7:45 PM
- - d3monc3lica   Hmm my CEL came on tonight when it happened, then ...   Feb 3, 2007 - 10:24 PM
- - Vissi   Hmm, lets cover the basics first, use a volt meter...   Feb 3, 2007 - 10:42 PM
- - d3monc3lica   I checked the CEL and it was code 31, im gonna loo...   Feb 4, 2007 - 1:33 PM
- - d3monc3lica   31 Air Flow Meter Signal. OK so now what do i...   Feb 4, 2007 - 1:39 PM
- - d3monc3lica   OK, so after checking google, and my Haynes manual...   Feb 4, 2007 - 1:58 PM
|- - Bitter   QUOTE(d3monc3lica @ Feb 4, 2007 - 1...   Feb 4, 2007 - 5:25 PM
- - d3monc3lica   Bump   Feb 4, 2007 - 3:11 PM
|- - JesterDC   I had this problem, turned out it was ONE FREAKING...   Feb 4, 2007 - 3:55 PM
- - Bigmeanbulldog55   ^^I also think this is a distributer or coil probl...   Feb 4, 2007 - 4:05 PM
|- - JesterDC   QUOTE(Bigmeanbulldog55 @ Feb 4, 2007 - 5...   Feb 4, 2007 - 4:09 PM
- - d3monc3lica   Awesome, thanks guys, one more thing. I noticed my...   Feb 5, 2007 - 12:01 AM
- - Bitter   it does sound like theres a problem with the map s...   Feb 5, 2007 - 1:15 AM
- - d3monc3lica   OK cool, now i have an idea of what it is even tho...   Feb 5, 2007 - 4:35 AM
- - Bitter   i dont know, but you can test the sensor. i'm...   Feb 5, 2007 - 12:19 PM
- - d3monc3lica   I figured out the problem, I turned the cone on my...   Feb 18, 2007 - 8:20 AM
- - Bigmeanbulldog55   QUOTE(d3monc3lica @ Feb 18, 2007 - 8...   Feb 18, 2007 - 11:29 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 30th, 2024 - 11:32 AM