 Stalling / Rough Idle / Hesitation / Stumble, Updated: CEL Code 31 |
 Feb 2, 2007 - 1:04 AM
|
 
|
 Enthusiast  Joined Aug 19, '04 From Maine Currently Offline Reputation: 0 (0%)  |
OK, so about a week or so ago i posted a topic about how my car wouldnt start, and i figured out it was to do with my ground wires. Now, something odd is happening.
1. If i start my car, it warms up fine but eventually will just die, stall right out. 2. If i start my car and drive, it will drive a ways (random), then act as if i pulled a terminal off of my battery, it will just have no power AT all as if it is going to stall out, but since i am in gear and still driving it doesnt completely shut off, this will happen over and over again for about....10-15 seconds at a time and then stop. Normally happens once per trip, but its random sometimes..... Any ideas as to what could cause this, i just regrounded 2 grounds on the side near my battery (one big, one small), but i still have no clue what could make my car loose power like that, and only for an instant. I have a SAFC 2 and i dont see any dips in voltage...... This post has been edited by d3monc3lica: Feb 4, 2007 - 1:48 PM |
 |
Replies
|
Feb 5, 2007 - 12:19 PM
|
|
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
i dont know, but you can test the sensor. i'm not sure of the procedure, i'll thumb through my book and see if i can find it later.
-------------------- |
Posts in this topic
d3monc3lica Stalling / Rough Idle / Hesitation / Stumble Feb 2, 2007 - 1:04 AM
pure_dx sounds like your alternator or battery is going ou... Feb 2, 2007 - 2:30 AM hurley97 check the connections to the battery. make sure th... Feb 2, 2007 - 10:18 AM d3monc3lica Yeah but my SAFC doesnt show a dip in voltage when... Feb 2, 2007 - 7:45 PM d3monc3lica Hmm my CEL came on tonight when it happened, then ... Feb 3, 2007 - 10:24 PM Vissi Hmm, lets cover the basics first, use a volt meter... Feb 3, 2007 - 10:42 PM d3monc3lica I checked the CEL and it was code 31, im gonna loo... Feb 4, 2007 - 1:33 PM d3monc3lica 31 Air Flow Meter Signal.
OK so now what do i... Feb 4, 2007 - 1:39 PM d3monc3lica OK, so after checking google, and my Haynes manual... Feb 4, 2007 - 1:58 PM
Bitter QUOTE(d3monc3lica @ Feb 4, 2007 - 1... Feb 4, 2007 - 5:25 PM d3monc3lica Bump Feb 4, 2007 - 3:11 PM JesterDC I had this problem, turned out it was ONE FREAKING... Feb 4, 2007 - 3:55 PM Bigmeanbulldog55 ^^I also think this is a distributer or coil probl... Feb 4, 2007 - 4:05 PM JesterDC QUOTE(Bigmeanbulldog55 @ Feb 4, 2007 - 5... Feb 4, 2007 - 4:09 PM d3monc3lica Awesome, thanks guys, one more thing. I noticed my... Feb 5, 2007 - 12:01 AM Bitter it does sound like theres a problem with the map s... Feb 5, 2007 - 1:15 AM d3monc3lica OK cool, now i have an idea of what it is even tho... Feb 5, 2007 - 4:35 AM d3monc3lica I figured out the problem, I turned the cone on my... Feb 18, 2007 - 8:20 AM Bigmeanbulldog55 QUOTE(d3monc3lica @ Feb 18, 2007 - 8... Feb 18, 2007 - 11:29 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 2nd, 2024 - 1:21 PM |