WTB: Custom Fit Long Cold Air Intake for 5SFE, Want to buy a drop-in LONG CAI Options

[chacha]

I want to buy a Custom Long CAI for the 5SFE if anyone have one they don't need or can make one for me without any cutting to the airbox....I want the Long CAI to drop right in the in engine comparment area like this pic:



Must have this Exact Hole Fitment for the Air Sensor




Or This setup:



Thanks for checking in, if anyone can do this for me, that would be great. i just want it to bolt right on because i have no time to make one or deal with the frustration of fitting it in correctly.....thanks again for checking in, if you can help me, pls contact me ASAP... I'd try doing this myself and following the guide lines to make one, but failed miserably and lost $50 bucks in the making....cuts on hands and arms, so i gave up, this is really not my thing.

This post has been edited by chacha: Feb 14, 2007 - 11:26 PM

[j0e_p3t]

i'd do the cutting and what-not for you, but i have an st so the measurements will be off. sorry, good luck getting one.