Sway bar end links, need new ones Options

[orvillescelica]

So like many others on here, during spring/shock install, i had to cut off the sway bar end links to get them off. So of course i need new ones. I would like to upgrade if i can so next time i wont have this problem. Does anyone know if ones from a st185 would work, as in they being a similar length? I have found great ones here:

http://www.twosrus.com/catalog/product_inf...products_id=254

If they dont work, ive been told i can call them and they will custom make some to the correct length.

[Batman722]

if you're getting clunking when going over any bumps (like something is knocking around back there) then it's more than likely the sway bar bushings, about $6 each from the dealer.

[azian_advanced]

if you're getting clunking when going over any bumps (like something is knocking around back there) then it's more than likely the sway bar bushings, about $6 each from the dealer.

i will try that, thanks.
just a quick question though, i've never taken a close look at those bushings, but would i have to unbolt the endlink-to-sway bar connection and slip the bushing through the sway bar? either way, i'll probably figure it out myself.

[Batman722]

if you're getting clunking when going over any bumps (like something is knocking around back there) then it's more than likely the sway bar bushings, about $6 each from the dealer.

i will try that, thanks.
just a quick question though, i've never taken a close look at those bushings, but would i have to unbolt the endlink-to-sway bar connection and slip the bushing through the sway bar? either way, i'll probably figure it out myself.

here's a quick link
http://www.colin99.co.uk/home_car.html