Calling all 5sfe's!, No spark! |
Calling all 5sfe's!, No spark! |
Jan 26, 2007 - 12:42 AM |
|
Enthusiast Joined Jan 23, '05 From Portage Currently Offline Reputation: 5 (100%) |
Well I am finishing the installation of my freshly rebuilt 5s all the fluids are in and I make the first attempt to start it. It cranks but doesn't fire. I have NO spark. The distributor is freshly rebuilt with the timing set correctly. I checked the ignitor with a voltage meter and it's reading as it should. My big green book says that the next thing would be the crank sensor but a new one is like $90 dollars so needless to say I don't want to go wasting money. I just want to know what you guys think the issue could be. All help is appreciated.
|
Feb 25, 2007 - 9:02 PM |
|
Enthusiast Joined Feb 2, '07 From columbia, MO Currently Offline Reputation: 0 (0%) |
I had the same problem with my 5s when swap out the motor and i found out that it was the fuel pump that went bad. If it doesn't get the right amount of fuel pressure then it won't put out a spark.
|
Lo-Fi Version | Time is now: November 25th, 2024 - 6:16 AM |