4 Hours labor charged to install Springs and Struts! |
4 Hours labor charged to install Springs and Struts! |
Feb 23, 2007 - 10:39 AM |
|
Enthusiast Joined Jan 12, '03 Currently Offline Reputation: 0 (0%) |
OMG. My mechanic (not dealer) just said it took 4 Hours to install all 4 springs and struts. At about $80 hourly rate - that comes to $320 for just install. I supplied the teins and kybs. WTF? I thought this takes 2 hours to do.
Also charged me 1 hour to replace spark plugs and fuel filter. Plus 1/2 hour labor to install both rear bushings. He had to order bushing from dealer at cost of $40 total. Ive been going to this guy for years. Well, last time. I feel this is too much. Maybe Im wrong. But for a 12year old car - paying $634 is not worth it to me. Now, I do the basics myself. Oil changes, battery replacements, filters, wipers, bulbs. I did do brakes once - but turned into a project on my old subaru. I think Im going to invest in a lift at this point. This post has been edited by nitemare: Feb 23, 2007 - 10:41 AM |
Feb 26, 2007 - 10:42 AM |
|
Enthusiast Joined Jan 12, '03 Currently Offline Reputation: 0 (0%) |
Got car back. Ride is so low now. Maybe too low. I bottom out on almost everything. Going up the drivway, small pot hole. I hear a loud metal on metal sound. Is this what lowering your car is supposed to be like? Granted, it seems to handle better and drives now like a low sports car - but didnt realize car has issues on the slightest incline. Even changing the oil - i could barely get under the car while on the ramps.
|
Feb 27, 2007 - 8:27 AM |
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
QUOTE(nitemare @ Feb 26, 2007 - 10:42 AM) [snapback]530395[/snapback] Got car back. Ride is so low now. Maybe too low. I bottom out on almost everything. Going up the drivway, small pot hole. I hear a loud metal on metal sound. Is this what lowering your car is supposed to be like? Granted, it seems to handle better and drives now like a low sports car - but didnt realize car has issues on the slightest incline. Even changing the oil - i could barely get under the car while on the ramps. Nitemare, I think i mentioned how to take care of this problem before. You will need Toyota Spring Bumpers. They go around the stem of the shock preventing the shock from fully compressing and in long term destroying them. Here is the OEM part number: 48331-20110. You can get them from Toyotaworld from Jeff. They run for $11.30 for both front sides. Same goes for both front left and right. I've had this bottoming out problem since I got my Intrax Springs because they are pretty low. I had the metal sound bang whenever I hit a good bump. Not anymore now that I have those bumpers. Note**If you are hearing clunks while turning, then the spring is not seated well but if you are hearing a metal bang when hitting a bump, this is your solution. Good luck. -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
Lo-Fi Version | Time is now: November 24th, 2024 - 2:03 AM |