FS: 97 Celica GT and 98 GT-Four half cut Options

[jcagle]

Well guys and gals, I'm moving internationally in about 4 months, so my project is going up for sale. This is a preview, as both items need a little work before being sold. For pictures, please check my profile, if you would like to see more, then pm me an email address, and what you would like to see.

Item 1:

1997 Celica GT

~121,000 miles
Please PM about any maintance information you'd like to know.

Modications:
Home designed intake (I have a BS in Mechanical Engineering, to be a Ph.D, so it's not a hack job)
Battery moved to boot
Viper Alarm System
DC to AC converter

Sound System:
Eclipse CD8455
Boston Acoustics 6.5" Rally Components up front
Boston Acoustics 5.25" Rally Components in back
Power by Rockford Fosgate P4004 amplifier

2x 10" Boston Acoustics G2 Subwoofers (you loose the back seats for these, but gain a little cargo space)
All 6 speaker have custom built enclousures
Powered by Rockford Fosgate P5002

Custom Enclosures for all 6 speakers
With the exception of the Rally speakers, all Modifications can be restored to factory original

Item 2:

98 Japanese GT-Four Half cut with only 30,000 miles on it

What came with the original half-cut:

Complete engine block with everything needed to make it crank (yes it does crank)
Complete 4WD drive down to the wheel hubs
Exhaust down pipe and mid pipe
Front strut towers
Front crash bar (though it is a little bent up, can be straightened out with proper equipment)


What I have bought since then:

Gauge Cluster
Climate Control interface unit
New Steering wheel levers (The originals were broken)
Almost new fog lights
Bonnet (Slightly damaged during shipping, looking into cost to repair it at the moment)
Bumper cover
Virtual and Paper printed Toyota Engine manual
Virtual and paper printed Toyota Body and Chasis manual
GT-Four Badge for the completed project
Lots of Extra Wiring harnesses


What you need to complete the conversion (not guarenteed, this is only to the best of my knowledge):

Fuel Tank
Fuel Pump
Fuel Lines
Grilles for bonnet and bumper cover
New rear differential mounting plate (the original was torn up)
Rear strut tower bar (I guess not necessary but strongly recommended)
Various small parts (nuts, bolts, and mounting equipment)

What you need to make it a GT-Four

Brake discs and Calipers (The ones from the GT will bolt directly to the wheel hubs)
New Wheels (To fit the larger brakes)
Spoiler and Riser blocks

That's about all I can think of for now, if it's not specifically listed, then ask.

Tentative price for the GT is $6,000, and $5,000 for the half cut +shippping (which I will help with in any way I can), if someone wants to buy them both I would let them go for $10,000. At this point, I will not part out either of these, so please don't ask.

This post has been edited by jcagle: Mar 10, 2007 - 10:57 AM