new struts, everything needed Options

[eclipse_04a]

ok, so after reading this entire section and not completely finding my answer, I have this question. I need to replace my struts, and at least rear strut mounts. now what else in the assembly should/do i need to replace? I am planning to go with the kyb gr2's and kyb mounts. do the mounts come with bearings? any other parts commonly wear out? car has almost 160k on it. is there a way to tell if I need front mounts before I take them apart? also does anyone know of a place cheaper than Import Replacement Parts? Any other advice tips in changing my struts would be appreciated. I have never done them before, but am mechanically capable. I have a chilton's manual for my car, (95 gt liftback) for reference, but everything seems pretty straight foward. not sure if i have the sport suspension package or not... will check tomorrow. If i have the normal suspension, what is different in the precedure? am I just undoing an extra nut, and inserting a cartridge and putting the nut back on vs. just replacing the entire piece?

[eclipse_04a]

when your talking whole assembly, what part are you talking about exactly? what I'm looking at is the kyb gr2 struts and rear mounts.

Numbers I found are:

95-99 sealed struts
Front R - 334378
Front L - 334379
Rear R - 334125
Rear L - 334126

94-99 unsealed struts <----- are these the whole assembly or just replacement cartridges?
Front R - 365092
Front L - 365092
Rear R - 334125
Rear L - 334126

Mounts with Bearing
Front - sm5372 <----- for cars with sport suspension package
Front - sm5164 <----- for cars without sport suspension package
Rear - sm5087


and just for anyone elses convience:

Dust boots
Front and Rear: sb103



This post has been edited by eclipse_04a: Mar 20, 2007 - 10:15 AM