Need your opinions on a mix of things.., Projector Lights / Wiring / HID |
Need your opinions on a mix of things.., Projector Lights / Wiring / HID |
Aug 13, 2003 - 1:59 PM |
|
Enthusiast Joined Jun 22, '03 From Toronto, Ontario, Canada Currently Offline Reputation: 0 (0%) |
So I ordered my low beam projectors and they should be here shortly.
Now here's my deal. How hard is it to wire up in the USDM celicas? Is it just a matter of getting the proper sockets (plugs) for the bulb cutting the stock ones and just rewiring the new ones in, or is there more chaos? Do the projectors screw right in? Also. I'm planning on getting a nice HID kit (I get them rather cheap $350 US or so..) for the low beams. What do you guys recommend? Would it look good in the projectors? Is it too hot for the projectors? Any bit of info would be great! Thanks, Shaun |
Aug 14, 2003 - 12:21 PM |
|
Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
Well, since you did have higher wattage bulbs in there, you may have burned something up. If you have a voltmeter, you should test the wires near the headlight socket to see if you're getting a good +12 volts and a good ground. If you aren't, then trace your wires back and keep on testing and looking for problems as you go back.
-------------------- New Toyota project coming soon...
|
Lo-Fi Version | Time is now: December 1st, 2024 - 6:44 PM |