 engine light |
 Mar 5, 2007 - 7:51 PM
|
 
|
|
Enthusiast  Joined Mar 20, '04 Currently Offline Reputation: 3 (100%)  |
My engine light has been on for two yrs now I believe it was the egr code. And I'm probley not gonna bother fixing it. I was just wondering if there anything I can do to disable the check engine light like pull a fuse or bulb I need my inspection sticket done soon.
|
 |
Replies
|
Mar 14, 2007 - 6:24 AM
|
|
 Enthusiast Joined Nov 29, '06 From Newnan, Ga. Currently Offline Reputation: 3 (100%) |
Did you check to see if your EGR Vacuum Switching Valve is working properly?- it's attached by a vacuum line to the EGR valve and is a soleniod for controlling the opening and closing of the EGR valve.
< from alldatapro.com tech manual> Unbolt it and use a volt meter to check that there IS continuity between the terminals. Resistance should be 37-44 ohms at 68deg F. If there is NO continuity replace VSV. Check for continuity between each wiring terminal and the valve body, replace VSV if continuity IS found. Inspect VSV operation blow air thru the hose that was removed from the EGR valve, air should blow from the filter. Apply battery voltage 12Volts across valve terminals then blow thru hose air should not blow from the filter. If not as specified replace VSV. See if that helps you troubleshoot the problem. Let us know. |
Posts in this topic
celicaboston1983 engine light Mar 5, 2007 - 7:51 PM
bindertch You are going to want to get that checked because ... Mar 5, 2007 - 8:25 PM hurley97 if you have a 96+ with OBDII they're just goin... Mar 5, 2007 - 10:24 PM celicaboston1983 its a 94gt lights been on for 2 or 3 yrs years now... Mar 5, 2007 - 10:32 PM hurley97 ever reset the ECU after changing the EGR? pull th... Mar 5, 2007 - 10:42 PM celicaboston1983 i didnt do it the people at the shop did it. not s... Mar 5, 2007 - 10:46 PM
6strngs QUOTE(celicaboston1983 @ Mar 5, 2007 - 7... Mar 5, 2007 - 10:50 PM celicaboston1983 i guess im in the same boat as you I just gave up ... Mar 5, 2007 - 10:53 PM 6strngs QUOTE(celicaboston1983 @ Mar 5, 2007 - 7... Mar 6, 2007 - 12:19 AM 56willysnut Clear computer, then drive car to emissions statio... Mar 8, 2007 - 9:22 AM celicaboston1983 thats what i did the light came back one right aft... Mar 8, 2007 - 6:05 PM 6strngs QUOTE(celicaboston1983 @ Mar 8, 2007 - 3... Mar 9, 2007 - 12:21 AM 6strngs ok, so today I put on a new EGR valve, vacuum modu... Mar 9, 2007 - 10:08 PM celicaboston1983 thanks keep me updated. I did safety only this yr ... Mar 11, 2007 - 12:00 AM 6strngs bad news. CEL came back on again! I'm stum... Mar 11, 2007 - 1:36 AM freakyre33c most of the time its your o2 sensor Mar 11, 2007 - 12:20 PM 6strngs QUOTE(freakyre33c @ Mar 11, 2007 - 9... Mar 12, 2007 - 2:10 AM 56willysnut Check these areas too;
Code 71 EGR system malfu... Mar 14, 2007 - 6:34 AM 6strngs I replaced the vacuum switching valve at the same ... Mar 14, 2007 - 1:35 PM 6strngs ok. wow. I'm stupid. So, I thought the vacuum ... Mar 16, 2007 - 1:05 AM 6strngs didn't work. nevermind. I have no idea. I thin... Mar 17, 2007 - 4:06 PM alltracman78 Have any of you bothered to see if the EGR passage... Mar 17, 2007 - 4:15 PM 6strngs QUOTE(alltracman78 @ Mar 17, 2007 - 2... Mar 18, 2007 - 12:39 AM alltracman78 Some 5SFEs have the valve and metal line as one pi... Mar 18, 2007 - 7:18 AM 6strngs QUOTE(alltracman78 @ Mar 18, 2007 - 5... Mar 18, 2007 - 1:54 PM alltracman78 Haynes is only good for so much.
Check for that st... Mar 18, 2007 - 2:14 PM 6strngs yeah, you're right. EVAP and EGR don't sha... Mar 18, 2007 - 10:06 PM 6strngs so, another day of driving and the CEL still has n... Mar 19, 2007 - 9:31 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 7:00 PM |