Amp help *NOW WITH BIG UPDATE*, The LED went red |
Amp help *NOW WITH BIG UPDATE*, The LED went red |
Mar 18, 2007 - 8:07 PM |
|
Enthusiast Joined Aug 15, '06 From MICHIGAN Currently Offline Reputation: 1 (100%) |
Ok, I have a power acoustik 980 watt plasma sphere amp (part # TS980-2... I think). Its hooked up to 2 kicker comp subs. Today I was listening to it at medium volume (not even close to the loudest I've ever had it) and the LED went from green to red. I'm pretty sure the subs didnt blow. There was no loud noise, It just stopped working. The amp wasnt hot at all so it didnt overheat. Is there some way to reset it or something. I've turned my car off and let it sit. I disconnected the power cable from my battery and the LED is still red which the manual says stands for "protect". I checked the fuses (by eye, not with a meter) and they seemed ok. Can anyone help me out with this? Is there a trick to get it working? What should I do?
Thanks for all your help This post has been edited by aslearvert: Jun 14, 2007 - 9:09 AM |
Mar 19, 2007 - 3:10 PM |
|
Enthusiast Joined Oct 10, '06 From Greensburg,PA Currently Offline Reputation: 27 (94%) |
CHECK YOUR GROUND!! a lot of times protect will come on due to a bad ground, make sure its a clear spot and the paint is removed
-------------------- Breaking Axles...
|
Lo-Fi Version | Time is now: November 27th, 2024 - 1:42 PM |