Bearings keep going bad, Bent spindle Options

[jmcdanie007]

About 6 months ago I ran over a curb in my 94 ST. There was a wobble in my front driver side tire that was so bad that the inside of my rib would rub my brake caliper. I took it to the shop and the guy told me that the bearing was bad. He replaced the bearing and told me that if the spindle was bent that the bearing would go out again pretty quickly. Sure enough, 3 months later the wobble is coming back. According to the shop I now need to change my spindle. Is the spindle part of the knuckle on 6G celicas? Ive been looking all over (via internet and repair manuals) for a how-to on changing a spindle and I cant find it. I think im just searching for the wrong thing. Anyone had to replace their spindle before? Any suggestions?

[Myung]

Hey I got the same problem i have replaced 3 times the hub bearing and this is the last time I'll do it, 1st time a guy called "mechanic" did it without a hydraulic press so . . .
2nd time i replace the hub 2 weeks later i had the noise again
3rd time i replace again the hub bearring, because i didnt take time to search on the internet

but now I NEED A SPINDLE DRIVER'S SIDE W/ABS if anyone knows about this part please let me know,

It's not a big deal to change the spindle you can do it yourself