W.I. help, need to find a nozzle location |
W.I. help, need to find a nozzle location |
Mar 25, 2007 - 7:38 PM |
|
Moderator Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%) |
I need some help figuring out where I could install the nozzle for water injection. I took a look at my intercooler, there is no room on the outlet for the nozzle to be placed.
The only idea I have right now is to tap the cold star injector hole on the manifold. Or some how figuring out a way to use the extra vac tap on the back of the manifold as the injection point. Any thoughts ? -------------------- I will return one day. |
Mar 27, 2007 - 11:22 PM |
|
Moderator Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%) |
This is a picture of a Manifold Air Temperature sensor adapted to the cold start injector location. If they can fit this sensor in, I can install the injector there.
Atomizing the water should'nt be a problem. The injector sits directly under where the runners split. The Air would pull the water down each runner quite well IMO. Stock Sensor installed -------------------- I will return one day. |
Lo-Fi Version | Time is now: December 10th, 2024 - 4:10 AM |