Check engine light, some circuitry questions Options

[nightryder]

ok so ive been throwing this check engine code for quite some time now. Its a 3440(?) i believe, but i know its a camshaft positioning sensor circuit malfunction. this normally wouldnt be an issue but our cars do not have such a sensor.


I first got the code after i did my engine swap (5s to 5s-thrown rod) in which i converted a federal emissions 5s from 94 into a cali emissions 5s using parts from my blown 97 motor.



so what was swapped over was the ecu, distributor, crank angle sensor, map sensor, oil pump and oil pan (might be more, ill check on it)



i understand that it is talking about the sensor circuit and not the sensor itself, but why is it looking for a circuit that my car shouldnt have? and how can it be remedied?

[alltracman78]

I believe you do have a cam pos sensor.
It's in your dist.

This post has been edited by alltracman78: Mar 28, 2007 - 2:54 PM

[nightryder]

I believe you do have a crank pos sensor.
It's in your dist.

but it doesnt say "crank position circuit malfunction" it says "camshaft position circuit malfunction" u think that could be my issue? i know that i have a CRANK ANGLE sensor but its down by the oil pump.