W.I. help, need to find a nozzle location |
W.I. help, need to find a nozzle location |
Mar 25, 2007 - 7:38 PM |
|
Moderator Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%) |
I need some help figuring out where I could install the nozzle for water injection. I took a look at my intercooler, there is no room on the outlet for the nozzle to be placed.
The only idea I have right now is to tap the cold star injector hole on the manifold. Or some how figuring out a way to use the extra vac tap on the back of the manifold as the injection point. Any thoughts ? -------------------- I will return one day. |
Mar 28, 2007 - 5:16 PM |
|
Moderator Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%) |
I'm not drilling into my IC fool
I think the flow would be very much equal for each cylinder. The injector would spray water directly into the air stream after the throttle body. After the injection, the air hits the back wall of the manifold then splits into each runner. I'm going to try it this way, I believe this will work. If I'm not happy with the results I'll just return the C.S.I. to stock. -------------------- I will return one day. |
Lo-Fi Version | Time is now: December 9th, 2024 - 1:11 AM |