6G Celicas Forums

Welcome Guest ( Log In | Register )

> Amp...
post Apr 1, 2007 - 7:46 PM
+Quote Post
xpokeme

Enthusiast
*
Joined Jan 18, '06
Currently Offline

Reputation: 0 (0%)




okay im getting frustrated wit this amplifier. i don't know whats wrong wit it, it keeps going to protect. once i turn on the headunit the amp turns to red for a second and then turns off... y?? i also switched ground.. any ideas?...where do you guyz place your negative ground? please help
 
Start new topic
Replies
post Apr 2, 2007 - 7:33 AM
+Quote Post
applejax

Enthusiast
*
Joined Mar 16, '07
From the gap that lies between one microsecond and the next...
Currently Offline

Reputation: 0 (0%)




QUOTE(xpokeme @ Apr 1, 2007 - 8:46 PM) [snapback]542110[/snapback]
okay im getting frustrated wit this amplifier. i don't know whats wrong wit it, it keeps going to protect. once i turn on the headunit the amp turns to red for a second and then turns off... y?? i also switched ground.. any ideas?...where do you guyz place your negative ground? please help




I saw similar posts floating around, not sure if they were yours, so excuse me if some of this was already covered...



Make sure your ground is a solid contact onto bare metal. Get some sandpaper out if you have to.



Check all fuses.



Unhook the speaker wires. Does the amp still go into protect mode?



Unhook the RCA's. Does the amp still go into protect mode?



You didn't let the smoke out, did you?



--------------------
The poster is not bound by any accuracy, stated or implied, of the previous post. Any similarities to actual people, fictional or real, may or may not be a coincidence.


--applejax

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: February 25th, 2025 - 2:45 PM