Amp... |
Amp... |
Apr 1, 2007 - 7:46 PM |
|
Enthusiast Joined Jan 18, '06 Currently Offline Reputation: 0 (0%) |
okay im getting frustrated wit this amplifier. i don't know whats wrong wit it, it keeps going to protect. once i turn on the headunit the amp turns to red for a second and then turns off... y?? i also switched ground.. any ideas?...where do you guyz place your negative ground? please help
|
Apr 4, 2007 - 8:09 AM |
|
Enthusiast Joined Mar 16, '07 From the gap that lies between one microsecond and the next... Currently Offline Reputation: 0 (0%) |
Curious, what (brand of) amp is this we are discussing? Does the owner's manual give a specific cause for the symptoms you are experiencing?
I am gathering from your original post in this thread that it does not go into protect until the remote turn on signal is sent, correct? Are there other amps in your system? If so, with the RCA's and speaker wires removed from the amp in question, remove the power wires or fuses of the other amps at the d-block, and remove their remote turn-on leads as well. Do you still get the pretty red LED? -------------------- The poster is not bound by any accuracy, stated or implied, of the previous post. Any similarities to actual people, fictional or real, may or may not be a coincidence.
--applejax |
Lo-Fi Version | Time is now: November 27th, 2024 - 6:49 PM |