![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Jan 22, '06 From Savannah, GA Currently Offline Reputation: 1 (100%) ![]() |
i know the E-153 trans will work, but i havent heard if the newer trans from the solaras are any different than that of the v6 camrys or mr2's. heres the trans im talking about, http://www.mr2oc.com/showthread.php?t=228086 and here is a picture of it http://picasaweb.google.com/cb0288/...key=hFWg9y8XXGc
is it true that i can use all gt mounts on this trans with the 3s swap, or is it possible to use the st185 mounts. any help is greatly appreciated |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 13, '02 From Blairstown, New Jersey Currently Offline Reputation: 6 (100%) ![]() |
The Camry and Solara E153's have a slightly longer final drive ratio, optimized for the V6 that they came from. The MR2 E153 transmission has slightly shorter final drive, but otherwise they are quite similar in non-LSD form.
For that transmission you can use your GT passenger mount and front engine mount, but you will need to use either an ST185 or ST205 drivers side mount and you have to use an ST205 rear mount (shares same crossmember as GT's, unlike the ST185 which is different from the 6th gen's.) BTW the link to the pictures doesn't work, so I couldn't check out the transmission. ![]() Good luck! -------------------- 3rd gen ST205 3SGTE - Alive and boosting. |
![]() ![]() |
Lo-Fi Version | Time is now: February 22nd, 2025 - 1:19 AM |