where can I find any info???????, jdm 7afe head Options

[dans_st]

I recently bought a JDM 7afe head and I am planning on swapping onto my 7af(t)e, I just cannot find any info on what to do since the JDM 7AFE does not have a distributor, I have tried searchin, and all I find is "JDM 3SGTE" stuff.
I would like any information I can get, I am not too concerned with the loss of EGR as my car is not using it right now anyways I just have a resistor on it and it seem fine.
I have also heard that I can use a ford EDIS system, what do I have to do to do this, I do not want to got over to a standalone, I currently am just running stock ECU with SAFC-II and plan to either looking into PROM tuning or if I cannot do that possibly go to E-manage ultimate.

Also is has anyone ever looked into siamesing the intake/head ports on intake side, I have done this on my 350 TPI Camaro, and it has really raised my powerband and output and the runners are very similar.I lost some torque output but am willing to do so to gain some higher RPM HP.

this is part of a long term project just I am trying to get as much info as I can.
thanks for your help
-Daniel

This post has been edited by dans_st: Apr 8, 2007 - 2:14 AM

[dans_st]

I understand the TVIS problem, I plan to remove it all together, here is somewhat what I want to do and did to my camaro that really helped. I know that these are eisier to siamese but I actually did this with my OEM ones on my camaro by welding 2 plated in top and bottom of the runners, I will try and find a pic of some like mine later this weekend.
just scroll about half way down the page.

http://www.chevythunder.com/fuel_injection...mance_pg_1a.htm

I have already ported the USDM head and think that I can go alot further with this one if I do it like in the link

This post has been edited by dans_st: Apr 13, 2007 - 1:51 AM