![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 27, '02 From UK Currently Offline Reputation: 1 (100%) ![]() |
OK, I'm in the process of installing my aftermarket fuel pressure regulator.
Installation seems pretty straight forward. However, when I come to set it what PSI can I go to? The manual states between 38-44 PSI as standard. Can I increase the PSI over 44, if so to what PSI? Also, what PSI can the standard Fuel Pump cope with? Any help would be greatly appreciated. BTW: I have a '97 ST with standard injectors, an Injen IS2040 intake, Denso Idridium spark plugs and Magnecor KV85 spark plug wires. |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Oct 1, '02 From Minnesota, USA Currently Offline Reputation: 0 (0%) ![]() |
Toyceli8, don't bother with the SAFC2. How about skip the wiring crap and the SAFC2 and get a standalone engine management system. such as the PRS8 over at PerfectPower.
-------------------- 95 Toyota Celica GT
Dead for now --> Soon to have a 3S-GTE 02 WRX --> This is for speed - Borla Exhaust - TurboXS BOV - Custom CAI 02 Civic EX - MB Quart Reference 5.25" Components - Rockford MTX 8" Subs in the doors - Alpine Type S Rear Fills - 2x Alpine SWR-1042D Subs in a custom fiberglass box - Alpine F345 Amp for the front doors - Alpine M605 on each Type R - Phoenix Gold wiring - Alpine CDA-9855 Head Unit - Alpine Amp link - 2x Rockford Fosgate 1 Farad Caps - The best Viper 791 alarm install ever |
![]() ![]() |
Lo-Fi Version | Time is now: February 22nd, 2025 - 3:13 AM |