where can I find any info???????, jdm 7afe head Options

[dans_st]

I recently bought a JDM 7afe head and I am planning on swapping onto my 7af(t)e, I just cannot find any info on what to do since the JDM 7AFE does not have a distributor, I have tried searchin, and all I find is "JDM 3SGTE" stuff.
I would like any information I can get, I am not too concerned with the loss of EGR as my car is not using it right now anyways I just have a resistor on it and it seem fine.
I have also heard that I can use a ford EDIS system, what do I have to do to do this, I do not want to got over to a standalone, I currently am just running stock ECU with SAFC-II and plan to either looking into PROM tuning or if I cannot do that possibly go to E-manage ultimate.

Also is has anyone ever looked into siamesing the intake/head ports on intake side, I have done this on my 350 TPI Camaro, and it has really raised my powerband and output and the runners are very similar.I lost some torque output but am willing to do so to gain some higher RPM HP.

this is part of a long term project just I am trying to get as much info as I can.
thanks for your help
-Daniel

This post has been edited by dans_st: Apr 8, 2007 - 2:14 AM

[normality78]

Good question you've raised dans_st! All the while i was being keep thinking about this and i was just about to do.

This is exactly what is in my mind and wanna do.


Im having a 7AFE head with TVIS. However, i've removed all the mini flaps but the centre mini roundstick in it was not able to remove. Coz all the flas was using screw tighten but not the stick. I guess i will need to drill it off. Or... i might as well remove the entire TVIS stuff coz frm what i can see, its just an additional piece of metal which is removeable.

Next would be looking wat head job i can do to maximise it. Oversize valve?


Kwanza,
Do u have a pic of non TVIS 7AFE head? I wanna see how does it looks like so that i can hunt for one. If the pic do show the port design, that would be the best.