 Brake problem driving me crazy!, UPDATE PG2!!!!!!!!!!!! |
 Apr 15, 2007 - 10:34 PM
|
 
|
|
Enthusiast  Joined Dec 13, '03 From Alabama Currently Offline Reputation: 1 (100%)  |
Ok, I recently decided to replace my master cylinder in my car because A. There was a lack of pedal pressure and B. I could not get any fluid to bleed out of the front right or left rear brakes. After I replaced the master cylinder with a reman I am still having the same problem. I made sure to reinstall all gaskets and O-rings, and to properly bleed the master cylinder before install. I have gone as far as removing the proportioning valve to make sure it still worked properly and it did and had no clogs. So as it sits right now I have good pressure to the front left and right rear brakes but no pressure to the right front or left rear brakes.
The master cylinder is providing pressure to the proportioning valve as proved by removing the line at the prop valve. I also sprayed all of the lines with windex and tried to find a leak but have not been able to find one. also checked the lines for any kinks but found nothing. Any ideas? This post has been edited by Justin: May 6, 2007 - 12:58 AM |
 |
Replies
|
Apr 23, 2007 - 9:57 PM
|
|
|
Enthusiast Joined Dec 13, '03 From Alabama Currently Offline Reputation: 1 (100%) |
well they got me an acdelco one the same day I took the car in and it works fine......for now at least.
|
Posts in this topic
Justin Brake problem driving me crazy! Apr 15, 2007 - 10:34 PM
jc47 You say you checked at the input to the proportion... Apr 16, 2007 - 10:48 PM Justin I blew through it and air passed through all ports Apr 16, 2007 - 11:45 PM toyotacrazy QUOTE(Justin @ Apr 15, 2007 - 10:34 ... Apr 17, 2007 - 10:15 PM Justin yes, i even bought a vacuum pump to bleed them. It... Apr 18, 2007 - 12:31 AM jc47 Do you have ABS? Apr 18, 2007 - 11:41 AM
toyotacrazy QUOTE(jc47 @ Apr 18, 2007 - 11:41 AM... Apr 18, 2007 - 5:08 PM Justin Yes I did. My dads friend is the service manager a... Apr 18, 2007 - 10:26 PM Justin Well turns out the master cylinder I got is not go... Apr 20, 2007 - 9:43 AM toyotacrazy QUOTE(Justin @ Apr 20, 2007 - 9:43 A... Apr 21, 2007 - 10:32 AM alltracman78 QUOTE(toyotacrazy @ Apr 21, 2007 - 10... Apr 23, 2007 - 9:54 PM jmastaniza or a recycling yard like T.A.P. Apr 22, 2007 - 11:09 PM alltracman78 AC Delco is a Toyota supplier now....
I don't... Apr 23, 2007 - 10:47 PM Justin QUOTE(alltracman78 @ Apr 23, 2007 - 10... Apr 24, 2007 - 12:32 AM toyotacrazy QUOTE(Justin @ Apr 24, 2007 - 12:32 ... Apr 24, 2007 - 5:11 AM Justin Ok so i replaced the rear shoes and adjusted them ... Apr 24, 2007 - 7:00 PM Jared95 What to do for spring setup on a 95 celica ST?
re... Apr 24, 2007 - 9:08 PM Bitter QUOTE(Justin @ Apr 24, 2007 - 7:00 P... Apr 25, 2007 - 1:33 PM alltracman78 Dude, don't just throw parts at it.
Check the ... Apr 25, 2007 - 7:19 PM Justin QUOTE(alltracman78 @ Apr 25, 2007 - 7... Apr 26, 2007 - 1:28 AM toyotacrazy QUOTE(Justin @ Apr 26, 2007 - 1:28 A... Apr 26, 2007 - 5:21 AM Justin QUOTE(toyotacrazy @ Apr 26, 2007 - 5... Apr 27, 2007 - 1:47 PM Justin Well never mind the caliper slide on the passenger... May 6, 2007 - 12:58 AM |
9 User(s) are reading this topic (9 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 10th, 2025 - 4:21 AM |