 Cranshaft wheel removal |
 Apr 28, 2007 - 8:11 PM
|
 
|
|
Enthusiast Joined Apr 28, '07 From Houston Currently Offline Reputation: 0 (0%)  |
I replaced the oil pan seal last weekend as I was leaking some oil & after driving it and looking harder, it looks like I have a small leak in the crankshaft seal - not confirmed as its covered, just guessed.
Lifted the engine, removed the right hand engine mount, pulled off the camshaft cover and the tried to undo the crankshaft bolt. I managed to bend a bolt, crack the side of the wheel (crowbar was touching it & holding the bolt) and the dam nut didn't even budge. Used a long (2ft) extension torque bar & nothing apart from damaging the crakshaft wheel. I put it back togther & pretty hacked off. I fear I'll do more damage to the wheel, offbalance it - if I haven't already & wondering if its time for the garage. Any ideas if I was to give it a second go ? $20 in seals & no doubt the garage wants a couple of hundred.... 95 Celica GT, 145000 |
Posts in this topic
bindertch I haven't done it before but could that bolt b... Apr 29, 2007 - 7:10 PM Hanyo make sure you use wd40 or some other oil to losen ... Apr 29, 2007 - 9:08 PM hurley97 if you're talking about taking off the cranksh... May 1, 2007 - 9:29 AM Jhensley I just did mine and I don't remember having an... May 1, 2007 - 4:18 PM DrAg1n320 Hey, the only reason why your are having so much t... May 3, 2007 - 10:22 PM
rjbibeau QUOTE(DrAg1n320 @ May 4, 2007 - 3:22... May 4, 2007 - 10:00 AM going_strong So you cann't just replace the seal like a tra... May 23, 2007 - 11:40 AM Silver94CelicaOwner Two words: Impact Wrench.
If you go to any majo... May 4, 2007 - 10:48 AM 3WayStunna QUOTE(Silver94CelicaOwner @ May 4, 2007 ... May 23, 2007 - 12:22 PM rjbibeau 3/4" impact didn't work. cheater bar with... May 9, 2007 - 12:16 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 28th, 2024 - 11:59 AM |