What do you think of these rims, New rims, not 100% fitment Options

[6gsillyca]

Looking to see what you guys (and gals) think of my *new* rims. I havne't decided 100% wether to go with these or not because the offset is a tad bit off. They are 18x7.5, 48+, and have a new set of 225/40/18 falken 451's. I also have a set of 15mm spacers, effectively making the offset 33+.

BTW the car isnt running, so its hard to tell how much I (would) rub, and from where. These are with the 15mm spacers on. Would it be better if I took them off, to allow for the wider rubber and larger diameter (to tuck the rims behind the fenders a bit more). I know both malpaso and wannabe are good with offsets and rim measurements, so if you could chime in with your opinion?

EDIT: sorry if the poll is confusing, I thought I closed it down










and here are a few shots of my current rims, they do not rub in the front when I turn, but do rub a bit in the rear going over large bumps/bumps at high speeds.







This post has been edited by 6gsillyca: May 7, 2007 - 12:59 AM

[devilsden97]

^way to go the way of every 6gc owner. thats car is black.