 help with alarm install... working funky |
 May 15, 2007 - 9:09 PM
|
 
|
|
Enthusiast  Joined May 24, '05 Currently Offline Reputation: 0 (0%)  |
I've installed a Code Alarm CA-160 upon seeing a couple people here with them who seemed to like them. Everything working for the most part, and it was pretty easy to replace an existing (old and dying Prestige).
I just have a couple problems that I'm trying to figure out. 1. Parking lights do not work when arm/disarming. I've tapped into the same wire used by the old alarm, which worked at one time then one day stopped blinking the lights. Parking lights do not work after installing the new alarm. 2. Same issue with unlocking the doors when disarm.. the door switch works, but doesn't unlock the doors all the time. Sometimes works, sometimes doesn't. Are there fuses or relays that could be causing the kind of problem or is it just electrical shorts I'm probably dealing with? |
Posts in this topic
Hanyo are you using the same wiring as the prestege alar... May 16, 2007 - 5:51 AM
estaticd QUOTE(Hanyo @ May 16, 2007 - 4:51 AM... May 16, 2007 - 3:28 PM Jaws4God yeah I had to tap into mine by the drivers side ki... May 16, 2007 - 2:57 PM lubu you need relays for the parking lights to work. I ... May 17, 2007 - 1:24 PM Hanyo The problem can be caused by the alarm it self not... May 17, 2007 - 10:35 PM estaticd I connected the new alarm wires to the old alarm w... May 20, 2007 - 1:01 PM  |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 22nd, 2025 - 2:18 PM |