 Help needed with alarm install |
 May 16, 2007 - 12:45 PM
|
 
|
 Enthusiast  Joined Mar 25, '07 From Holland Currently Offline Reputation: 0 (0%)  |
I need to know how to ground negative. I have 1 black wire to ground it, but where do I stick this to? Also, I need to connect the alarm to my battery. Where can I run the wire to the battery? Can I pull it through the firewall where the cable from the climate control goes?
|
 |
Replies
|
May 16, 2007 - 6:05 PM
|
|
|
Enthusiast Joined Mar 25, '07 From Holland Currently Offline Reputation: 0 (0%) |
to be honest...i dont understand most of the manual. so far i have connected acc, on1, on2, start, constant +12v. i still need to connect the battery, horn and powerlocks.
this alarmcomes with a horn, but in the manual says theres only 1 pink wire going to the horn. the horn itself has 2 wires and as far as i know all speakers, headphones, horns etc etc needs 2 wires to make it work remote start is also a function, but the manual says it can only be installed if the vehicle has stepless gear...stepless gear as automatic/manual gear???? help! i forgot 1 thing....theres also a relay for the high oil pressure...is there any need for this?? |
|
May 16, 2007 - 6:12 PM
|
|
|
Enthusiast Joined May 24, '05 Currently Offline Reputation: 0 (0%) |
QUOTE(djseven @ May 16, 2007 - 5:05 PM) [snapback]558560[/snapback] to be honest...i dont understand most of the manual. so far i have connected acc, on1, on2, start, constant +12v. i still need to connect the battery, horn and powerlocks. this alarmcomes with a horn, but in the manual says theres only 1 pink wire going to the horn. the horn itself has 2 wires and as far as i know all speakers, headphones, horns etc etc needs 2 wires to make it work remote start is also a function, but the manual says it can only be installed if the vehicle has stepless gear...stepless gear as automatic/manual gear???? help! i forgot 1 thing....theres also a relay for the high oil pressure...is there any need for this?? Horn has a black and red likely. Pink goes to red, black goes to ground, usually a self-taping screw with star nut screwed into the firewall or other metal in the engine compartment. Stepless gear... Pretty sure that means automatics only. It can be installed into a manual, but you will need to read up on it. Oil pressure probably for remote start. What alarm is this? |
Posts in this topic
djseven Help needed with alarm install May 16, 2007 - 12:45 PM
Jeremiah The whole body of the Celica is grounded, so you c... May 16, 2007 - 2:07 PM djseven thx jerimiah! i also found those 2 links u men... May 16, 2007 - 3:16 PM
Mangozac QUOTE(djseven @ May 17, 2007 - 6:16 ... May 17, 2007 - 4:23 PM estaticd nc----orange
com---white
no----yellow
NC no conne... May 16, 2007 - 3:35 PM djseven a million thx ecstaticd!!!
it says re... May 16, 2007 - 6:32 PM estaticd QUOTE(djseven @ May 16, 2007 - 5:32 ... May 16, 2007 - 6:46 PM djseven ive been working on this alarm for a few hrs now..... May 17, 2007 - 9:25 AM lubu go here, probably everything you need:
http://www... May 17, 2007 - 1:17 PM djseven yo guys i need ur help! ive scanned the instal... May 20, 2007 - 3:48 PM Hanyo you have an overly complicated alarm system. Its q... May 20, 2007 - 4:49 PM djseven Thx hanyo!!! I'll try this the fir... May 21, 2007 - 7:52 PM djseven I havent been able to do anything today. But ive b... May 22, 2007 - 7:55 PM Hanyo you need to read your manual to determine the engi... May 22, 2007 - 11:46 PM lubu for ur central lock you need to choose layout two.... May 23, 2007 - 10:50 AM djseven Thx alot again hanyo and lubu!
basically, the... May 23, 2007 - 7:20 PM djseven im drinking a few beers and ive been looking at th... May 23, 2007 - 7:30 PM lubu yea the lock/unlock wires go to the module...
get... May 23, 2007 - 9:19 PM djseven just wanted to let u guys know that im short of ti... Jun 5, 2007 - 7:50 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 17th, 2025 - 8:25 AM |