 "zero interference head"? BS or NOT? |
 May 17, 2007 - 6:22 AM
|
 
|
 Enthusiast  Joined Feb 18, '07 From So Cal Currently Offline Reputation: 3 (100%)  |
so i had a head gasket replaced and now i have no compression in the #4 cyl. i took it to another shop and they said it might be a bent valve, then they asked me if some1 tried 2 start it with the cams in wrong. and thats exactly what the guys that tried 2 fix it were doing when i was at there shop. so i told the guys who did the work and they said it could not b there fualt bcuz its a "zero interference head" and that the cams dont come down enough to bend the valves. BS or NOT?
This post has been edited by SlickRick: May 17, 2007 - 6:23 AM -------------------- Your signature is not allowed on 6GC - Defgeph
|
Posts in this topic
Racer_J As far as I'm aware, the 3SGE (Not BEAMS) has ... May 17, 2007 - 7:16 AM 3WayStunna yes, the 5s/3s engines are non-interference, unles... May 17, 2007 - 8:55 AM
SlickRick QUOTE(3WayStunna @ May 17, 2007 - 1... May 17, 2007 - 10:55 AM mikew04 Did you get the head resurfaced? They can warp whe... May 17, 2007 - 11:53 AM presure2 QUOTE(mikew04 @ May 17, 2007 - 12:53... May 17, 2007 - 7:42 PM tin_foil Yeah, it's true. If it was BS I wouldn't h... May 17, 2007 - 7:54 PM Racer_J Yeah, it's either your piston rings (but you... May 18, 2007 - 1:36 AM SlickRick QUOTE(Racer_J @ May 18, 2007 - 6:36 ... May 19, 2007 - 2:35 AM Racer_J QUOTE(SlickRick @ May 19, 2007 - 8:3... May 19, 2007 - 7:42 AM SlickRick QUOTE(Racer_J @ May 19, 2007 - 12:42... May 19, 2007 - 5:04 PM alltracman78 Do a leakdown test to see where it's leaking f... May 18, 2007 - 4:59 PM  |
9 User(s) are reading this topic (9 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 13th, 2025 - 3:19 PM |