pic request, need a pic of an OEM 5S EGR valve and vac modual Options

[Valo666]

I brought my car into my shop at my school and put it on the sniffer to see how its running to see why it would be failing my e-test all the time. So my teacher took a look at a bunch of stuff and one thing he noticed was on my vacuum modual i have the 2 vacuum hoses running to the throttel body, but nothing coming off the back side, with the single vacuum nipple. So we took a look at the vacuum diagram on my firewall and it says that there should be a vacuum line going from there to the switch, but then i took a look at all data's vacuum switch diagram and it says for non cali spec it only has 1 line running just to the EGR valve its self. So im trying to figure out if the guys who installed my motor f*cked it up and didnt connect it, or it actually doesnt need it, or im completely stupid and cant read the diagram properly. Any ways, can some one take a pic of their EGR system and Vacuum modual?? also if some one can get at their switch, take a pic of the switch too. Thanks

Bryan

[bindertch]

Well the two out of the right should go to the throttle body (one labeled P and the other R). The left one should go to the VSV and then to the top of the EGR valve. The bottom one should go to the bottom of the EGR valve. This is how the USDM is shown in the Mitchell that I have.

This post has been edited by bindertch: May 17, 2007 - 10:10 PM