3rd Gen 3SGTE already equipped with Shimless Bucket?, Read this on Toyota Nation Options

[qatar11]

http://toyotanation.com/forum/t36210.html

Which states that the 3rd Gen has a "shimless bucket"

Looking at the pictures here

http://www.rossmachineracing.com/3sbucket.html

Shows the difference between the 2nd gen 3SGTE bucket and the MRS bucket

My Buckets look like the MRS bucket but with a removable shim (on the underside) that I could change to alter the thickness without buying whole new buckets.... now the only trick is to source a "shim" from somewhere shouldn't be toooo hard.

Preguntas? Problemas? Comments?


I will append my own posting.....

also from the same toyota nation posting

Q: Whats shimless or shim under bucket lifters?
A: The stock bucket weighs 1.6 oz. & the MRS(MR Spyder) weighs 1.03 oz. That is a weight savings of 35.5%. When high lift cams are used with stock lifters it has caused the shims that are used for adjusting cam/lifter clearance to fly out. This eliminates that by eliminating the shim all together. That lightens the valvetrain weight and allows higher RPM limits.


Part Number Lift
13751-23030 5.12
13751-23040 5.14
13751-23050 5.16
13751-23060 5.18
13751-23070 5.20
13751-23080 5.22
13751-23090 5.24
13751-23100 5.26
13751-23110 5.28
13751-23120 5.30
13751-23130 5.32
13751-23140 5.34
13751-23150 5.36
13751-23160 5.38
13751-23170 5.40
13751-23180 5.42
13751-23190 5.44
13751-23200 5.46
13751-23210 5.48
13751-23220 5.50
13751-23230 5.52
13751-23240 5.54
13751-23250 5.56
13751-23260 5.58
13751-23270 5.60
13751-23280 5.62
13751-23290 5.64
13751-23300 5.66
13751-23310 5.68

someone might want to sticky this info? or put it into a wiki? cough chris cough

[qatar11]

Are the buckets different between 1ZZ and 2ZZ cause the bucket that showed up last week is too small.... it fits inside my old buckets actually.... UGH

[Kwanza26]

Are the buckets different between 1ZZ and 2ZZ cause the bucket that showed up last week is too small.... it fits inside my old buckets actually.... UGH

They're not listed as different in my books... so maybe not... although I tend to think they would be different. The 2ZZ/1ZZ buckets are listed to be 31mm compared to the 3SGTE (1994 MR2 turbo specs) at 28mm.