6G Celicas Forums

Welcome Guest ( Log In | Register )

> Car won't stay in gear, Keeps popping out...
post May 25, 2007 - 1:17 AM
+Quote Post
6gsillyca



Enthusiast
***
Joined Jan 13, '06
From UnderTheGround403
Currently Offline

Reputation: 2 (100%)




My car won't stay in gear for some reason. I can get it into first (for the most part) but going into 2, 3, 4, 5, r it won't stay. It pops back into neutral. I pull shift knob back into 2nd, and it just won't stay. If I wiggle/jiggle it a few time in and out I can manage to get it to (somewhat) stay in, but it doesn't seem to be in gear very good. Like when I am able to get it into gear the SLIGHTEST bump on the shift knob will knock it back out into neutral. Usually you can push the knob with a bit of force before the tranny will "pop" the gear back into neutral. Clutch fully depressed doesn't help either.

1st and 3rd are able to go in but dont stay very well (come out easily). 2nd is hit and miss (haven't found a way to "jiggle" it in). 4th needs to be wiggled around to get it in (while pulling back, can't pull back straight, need to wiggle and pull back to get it in gear), and reverse is hit and miss.

Idea's?
 
Start new topic
Replies
post May 25, 2007 - 5:52 PM
+Quote Post
Red94Celica

Enthusiast
*
Joined Oct 13, '06
From PA, USA
Currently Offline

Reputation: 0 (0%)




Shift linkage IS a easy fix. I wouldnt give up on the car just yet

Edit--
Straight from my Haynes manual
IPB Image

This post has been edited by Red94Celica: May 25, 2007 - 6:04 PM

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 27th, 2024 - 3:27 PM