MOD'S PLEASE LOCK, NO LONGER DOING IT THIS WAY, PLEASE LOCK Options

[pittfirefighter]

well due to how many people i've helped through the process, i've decided to make it simpler... send me your climate control box and tell me the color you want... $2 per LED including installation costs... about 12 LED's needed to complete, takes 1-2 days to complete and then shipped back to you... current color choices are blue, red, green and white (white is a little more expensive but is a pure white), PM me any questions or for address to send unit...

EDIT: I WANT TO ALSO ADD THAT THE WORK I DO IS NOT THE SPRAY-PAINT HOW-TO SHOWN IN THE HOW_TO SECTION, mine are LED's soldered into the board in the correct positions, every LED is tested before sending back to you to make sure it is working correctly, EVERY light on the climate control board will be whatever color you pick and can be changed in the future if you so wish, this is not a permanent modification like the spray paint (they will be the color for as long as you choose)


PLEASE LOCK THIS THREAD

This post has been edited by pittfirefighter: Jul 25, 2007 - 2:46 PM

[WannabeGT4]

That's a good start pittfirefighter but if you want it to look perfect you'll need to back light each button individually. The directional nature of LEDs do not make them the best solution for back lighting our climate controls. I've tried it just about any way you can think of and this is the only option I've found to be satisfactory.
BTW, Oznium has pretty good prices on their bulk 3mm LEDs. Should help your profit margin or you could pass the savings along to the customer. $2 an LED is pretty steep installed or not.
http://www.oznium.com/led

It'll take a little more work but as you can see the results are outstanding:


This post has been edited by WannabeGT4: May 26, 2007 - 5:07 PM