![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Jul 26, '05 From New Carlisle, IN Currently Offline Reputation: 0 (0%) ![]() |
I just received my new Pioneer DEH-P7800MP and I have a harness adapter already but I was wondering what mount do I need to buy?
-------------------- |
![]() |
![]() |
|
Enthusiast ![]() Joined Jul 26, '05 From New Carlisle, IN Currently Offline Reputation: 0 (0%) ![]() |
so could I get summed up exactly what I'm going to need? Since everything got stolen basically, it'll be like starting from scratch. I'm aware that I'll need something to fill in the double din slot since the stereo is only a single din. I know best buy sells something that does fit, because they gave me something when i had my stereo installed there in the first place. I also have a wire harness adapter and i already have everything taped off, all i need to do is solder for the most part.
Edit: ![]() The stereo ![]() heres the back, for the little blue circle auxiliary input could i take an auxiliary cable from that and plug it into my ipod? i don't feel like spending 50 bucks on a stupid ipod interface thing. ![]() all of the wires on my wiring harness adapter match up perfectly except the system remote control wires, should i cut the wire coming from the Pioneer wire harness and solder it to the harness adapter? the ground wires don't match up either but i understand both of those will need to be separately grounded and the mute wire i'll tape off or something This post has been edited by tcox22: May 30, 2007 - 10:57 PM -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 7:43 AM |