Did my Valve Cover Gasket, Finally! Options

[devilsden97]

So the background, for about a year my car has been leaking small amounts of oil. (my garage floor shows it.) When i brought my car in for the inspection in november, the mechanic said i was leaking oil, and he presumes its from the valve cover gasket. So about 2 weeks ago I got a replacement gasket, and today i finally maned up, and put it in.






^top of the motor off.

While I was at AutoZone getting oil and a filter (im also going to do my oil) I picked up some Duplicolor High temp engine paint.




^ its the same color, just ones in the sun, other is in shadow....I masked off the 16valve part, and the oil, and top where the plugs are put in.

REad on for more info.

This post has been edited by devilsden97: Jun 2, 2007 - 3:57 PM

[devilsden97]

Sorry for all the questions, I figured if you've done it you'd save me some time when I try to do it.

So for taking the head off, you just need to pull the wires out the top, then unscrew the spark plugs? Or no? Then just pull the head off and replace the gasket?

When you apply the sealant you should just put it on over the gasket? And then put the head down on it, like a sandwich (if that makes any sense!)?

Thanks for all the help by the way!

^nah man its allllll good. Questions help u learn. U pull the plug wires, then unscrew the caps the go AROUND the channel were the plugs are. When i applyed the sealent, i looked at where it was orginally (it had some oozed out on the sides, and placed it there, but on the gasket. then i added a little bit more to the corners of the cams (as stated by Presure2) i also put some at the corners of the gasket itself, because its farthest from the presure points that help it seal.

So i went to an autozone near by and got the PCV valve....so its offically done!

PICS!


^complete (the "red" looks more orange....oh well ill deal.)


^new pcv valve


^CLEAN valve cover (sorta)


^5sfe power!





The rest is for lew!






^hood up! cuz its pimpin



This post has been edited by devilsden97: Jun 3, 2007 - 2:12 PM