Did my Valve Cover Gasket, Finally! Options

[devilsden97]

So the background, for about a year my car has been leaking small amounts of oil. (my garage floor shows it.) When i brought my car in for the inspection in november, the mechanic said i was leaking oil, and he presumes its from the valve cover gasket. So about 2 weeks ago I got a replacement gasket, and today i finally maned up, and put it in.






^top of the motor off.

While I was at AutoZone getting oil and a filter (im also going to do my oil) I picked up some Duplicolor High temp engine paint.




^ its the same color, just ones in the sun, other is in shadow....I masked off the 16valve part, and the oil, and top where the plugs are put in.

REad on for more info.

This post has been edited by devilsden97: Jun 2, 2007 - 3:57 PM

[devilsden97]

The valve cover looks great, you should paint the heat shield hi temp black. That valve cover looks a little lonely now.

I think i have my next project...lol

the 5sfe's exaust manifold doesnt get hotter then 1200°F right? Also, i didnt clear coat my valve cover, and ive heard some people say its going to start chipping..any insight on that? Should i clear cloat the exaust manifold heat shield then?