 question about boost cut |
 Jun 5, 2007 - 7:38 PM
|
 
|
|
Enthusiast  Joined Mar 4, '06 From Ohio Currently Offline Reputation: 10 (100%)  |
I have a blitz type R dual sbc. It has a built in boost limiter. I hit the factory boost cut of 14 psi and I want to eleminate it or raise it. Ive heard you can cap off the boost pressure sensor and plug the hose going to it and will eleminate boost cut. By doing this will my tvsv monitor still work? Im thinking the ecu uses that map sensor to control the tvsv. Im in the process of collecting the parts to raise my fuel cut with the homemade controller. thanks
This post has been edited by toyotacrazy: Jun 5, 2007 - 9:02 PM |
 |
Replies
|
Jun 6, 2007 - 9:59 PM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Posts in this topic
toyotacrazy question about boost cut Jun 5, 2007 - 7:38 PM
lagos how do you know its fuel cut that you are hitting? Jun 6, 2007 - 9:02 AM
toyotacrazy QUOTE(lagos @ Jun 6, 2007 - 9:02 AM)... Jun 6, 2007 - 9:25 AM lagos it could be knock response. the only way to know f... Jun 6, 2007 - 9:32 AM bodhi Not sure of your exact setup, but it sounds (and l... Jun 6, 2007 - 5:02 PM toyotacrazy QUOTE(bodhi @ Jun 6, 2007 - 5:02 PM)... Jun 6, 2007 - 5:25 PM bodhi sounds like basic boost cut then, i'm not fami... Jun 6, 2007 - 5:32 PM toyotacrazy QUOTE(bodhi @ Jun 6, 2007 - 5:32 PM)... Jun 6, 2007 - 5:39 PM lagos why dont you check your CEL codes? since you had f... Jun 6, 2007 - 5:56 PM toyotacrazy QUOTE(lagos @ Jun 6, 2007 - 5:56 PM)... Jun 6, 2007 - 6:17 PM toyotacrazy QUOTE(lagos @ Jun 6, 2007 - 5:56 PM)... Jun 8, 2007 - 5:21 PM lagos what boost gauge are you using? im willing to bet ... Jun 9, 2007 - 9:28 AM toyotacrazy QUOTE(lagos @ Jun 9, 2007 - 9:28 AM)... Jun 9, 2007 - 2:47 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 1:14 PM |