Auto 3S shifting on it's own., New ECU did the trick. |
Auto 3S shifting on it's own., New ECU did the trick. |
Jun 16, 2007 - 1:37 PM |
|
Enthusiast Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) |
My car is shifting on it's own now. I installed a new 5S ECU for the transmission this morning and took it for a spin and everything worked... 1, 2, D, OD. I'm still not 100% sure what went wrong with my stock ECU but it probably has something to do with my uncle "helping" the day I made the bracket for the ECUs.
The shift points seem higher than they were stock for some reason. I assume it's because of the different igniter. This is fine with me though the 3S power band is higher than the 5S anyway. EDIT: Now that I think about it, this was probably due to my jubilation causing me to keep the gas pedal mashed to the floor. When I was trying to get my stock ECU to work I connected more signal lines to the ECU than are probably needed, so I'll more than likely try removing as many wires going to the 2nd ECU as possible and see what the bare minimum is to make this work. Funny thing is it took me all of 20 seconds to plug this thing in and I've had the new ECU since the beginning of the year... Talk about procrastination. This post has been edited by WannabeGT4: Jun 16, 2007 - 1:41 PM -------------------- Project ST204.5 99.88946% complete... |
Lo-Fi Version | Time is now: November 29th, 2024 - 10:25 PM |