![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Oct 8, '06 From Jersey sHore PA Currently Offline Reputation: 0 (0%) ![]() |
ok so my car wont start and i see the check engine light on, so i used a paper clip to jump te1 and e1(i think there the right ones) well anyway i turned the key and my check engine light was blinking continuously, what code is that
![]() -------------------- 3sgte next year i hope
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) ![]() |
I should of explained it, sorry.
It's the ignition/distributor that's the problem, check you distributor cap/rotor and make sure they're not bad, also the wires, plugs. worse case senerio, it's the timing belt. To check this, take the dizzy cap off so you can see the rotor. Then have someone try to start the car and you will be looking at the rotor, if it doesn't spin when someone is trying to start the car, you have a problem. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: February 20th, 2025 - 1:17 AM |