Dash MOD, Ideas on working in one... Options

[ikey_karapat]

I wanna stick in a switch DIN or something to that effect on my dash... I'm thinking 3 or 4 switches to control my trunk and cabin neons and couple other things... only thing is I have a double DIN stereo so that part's out... I was thinking maybe the part where the cigarette lighter is; just remove that and work in something with the switches on there..... ideas...???

If anybody else has done mods like that... a few pics could be good...

This post has been edited by ikey_karapat: Jun 20, 2007 - 1:27 PM

[ikey_karapat]

I think this thing double posted on me... sorry.. moderators help a guy out yeah

Ok mine is RHD so yeah it's the left.... I was just thinking, why don't I replace the cigarette lighter with an engine start button and put the switches next to it.....
Davey - where do I find that OEM switch panel you talking about? part number or name or sumtin....

[BloodyStupidDave...]

Ok mine is RHD so yeah it's the left.... I was just thinking, why don't I replace the cigarette lighter with an engine start button and put the switches next to it.....
Davey - where do I find that OEM switch panel you talking about? part number or name or sumtin....

These are for LHD but might assist:

Cover, Instrument Panel Hole (55548-20090) - this is the cubby hole

Base, Switch (from convertible) (55449-20100) - this is the panel to hold 3 switches





Sorry, can't find a picture of the Lexus trunk/gas switches panel.

This post has been edited by BloodyStupidDavey: Jun 20, 2007 - 5:53 PM

[6gcSTVT]

[quote name='BloodyStupidDavey' post='570596' date='Jun 20, 2007 - 5:15 PM']
[quote name='ikey_karapat' post='570561' date='Jun 20, 2007 - 9:43 PM']

These are for LHD but might assist:

Cover, Instrument Panel Hole (55548-20090) - this is the cubby hole

Base, Switch (from convertible) (55449-20100) - this is the panel to hold 3 switches





Sorry, can't find a picture of the Lexus trunk/gas switches panel.
[/quote]

So if you already have the cubby hole can "I" just buy the switches or is that cubby hole a "special one"??? also wouldn't those switches just rock back and forth and not stay up or down since they are "convertable top" switches?

This post has been edited by 6gcSTVT: Jun 20, 2007 - 5:29 PM

[BloodyStupidDave...]

So if you already have the cubby hole can "I" just buy the switches or is that cubby hole a "special one"??? also wouldn't those switches just rock back and forth and not stay up or down since they are "convertable top" switches?

I am guessing you already have the RHD version of the cubby hole. The switch panel replaces the cubby hole. Then you just pop the swithces or blanks into the panel. The switches themselves aren't part of the panel - they are seperate.

Toyota use basically the same switch size across most of their range. While you are right that the convertable switches aren't latching there are latching rockers and latching push switches that will fit into those holes (along with various other accessories). But as they nearly all have either screenprinted or 'glogo' lettering you may be better off using a generic rocker switch from your local auto spares shop. Choose carefully and you'll find one that is a good fit.