![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined May 3, '06 From New Hampshire Currently Offline Reputation: 2 (100%) ![]() |
The most recent Info on this is at the end of the first page and more discussion is on the second page. This mod is currently done, More info on page 2.
^^UPDATE This post has been edited by 6gcSTVT: Jul 6, 2007 - 12:44 PM -------------------- ![]() Darin H. |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined May 3, '06 From New Hampshire Currently Offline Reputation: 2 (100%) ![]() |
Okay, I went and did some research on the modifying of our side marker lights. The method that BloodystupidDavey suggested is definitely used by other car enthusiasts. I have done this and it finally works. During the daytime, when no parking lights or lights are on, then just your normal front turns blink. When i put my parking lights on and tried my turns, the front and side blink off each other, so when the front is on the side is off and vice versa. As K-ESD said the first time i tried this mod, all 4 lights will blink at the same time regardless of what direction you were signaling for, which WAS correct when i wired into the power. This method of cutting the ground on our sidemarker and attaching the wire to it works, yet I don't know what drain there is on the wires but all the lights seems to be as bright as they were before. I got 4 blinkers in a way I wasn't first attempting but it's def better than 2, especially for the cars next to me who would normally not see our lane changing. I'll post a vid later.
This post has been edited by 6gcSTVT: Jul 6, 2007 - 12:43 PM -------------------- ![]() Darin H. |
![]() ![]() |
Lo-Fi Version | Time is now: February 21st, 2025 - 8:51 AM |