![]() |
![]() |
![]() |
|
Enthusiast Joined Jul 17, '07 From Fremont, CA Currently Offline Reputation: 0 (0%) ![]() |
Hello,
New to the 6th Gen family. I am currently replacing all of my speakers on my Gen 6 Convert. I know the door uses a 8 inch woofer which I am converting to 6.5. As for the mids on the door they are 4 inch but where can I get a harnest to mount the speakers. The orignal brackets are fixed into the orignal speakers and cannot be removed. This has been driving me crazy looking for help so, if anyone can shed some light on this issues it will be much appreciated. Also, is it difficult to replace the rear speakers? I know they are 6.5 as well but I cannot figure out how to disassemble the rear panel. Once more thing, do I need a special harness for the rear speakers. Thanks, Lay 1995 GT Covert |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Aug 27, '05 From Texas Currently Offline Reputation: 0 (0%) ![]() |
Did you figure out how to take the rear panels off on the vert? If not you have to take out the bottoms of the back seats, they should pull right out. Then there are two screws at the bottom of the panel and two more on top. One is black and the other is in the button. IF you remove all these screws the panel should slide right off (towards the front of the car)
Just so this is on record. -------------------- ![]() I am now a part of the ihavemorethen16gc club! |
![]() ![]() |
Lo-Fi Version | Time is now: February 22nd, 2025 - 12:05 AM |