Big Brake Kit, 6gc GT |
Big Brake Kit, 6gc GT |
Feb 24, 2007 - 2:19 AM |
|
Enthusiast Joined Jun 19, '06 From Portland, OR Currently Offline Reputation: 1 (100%) |
Sneak peak.. this is the new rotor.. that is a 16" 7th gen rim.
Stock Rotor w/ rim installed Stock GT Rotor no rim New rotor no rim Probably be 2 versions of the brake kit. One would be a 318mm rotor designed for use on 16" or larger rims. The other would be a 323mm rotor which will only fit 17" or larger rims. Both using the same 4 pot caliper. Personally I'll be using 318mm rotor.. The price difference between the two will be pretty small.. The 318mm kit will actually be the more expensive one.. between 30-40 dollars more. Btw, these are camera phone pictures... I never thought I'd see the day when cam phone pics looked this good... -------------------- 87 4runner DLX 22re, 5spd, 4.30gr, 4" lift, 30" tires, HID w/ Projectors, 6spkr + sub, custom exhaust, 94 celica leather seats, SR5 gauge cluster and clinometer. Future engine swap... possibly a 2jzge.
|
Jul 23, 2007 - 2:52 PM |
|
Enthusiast Joined Sep 28, '03 From Bloomington, IN Currently Offline Reputation: 0 (0%) |
RCT, do you only have BBK's up front? And noise is determined by pad selection
-------------------- NASA/SCCA RX-7....currently under the knife
92 Civic hatch B16 - Sold 10th anniv RX-7 - RIP The Slow Celica - Sold...and then crushed crushed due to street racing. Quote from Seinfeild: George's Boss reading a magazine: "People magazine's most beautiful people. Oh and a Celica...nothin wrong with that!" |
Jul 23, 2007 - 3:21 PM |
|
Enthusiast Joined Jul 2, '05 From NYC Currently Offline Reputation: 0 (0%) |
QUOTE(SlowCelica94 @ Jul 23, 2007 - 3:52 PM) [snapback]581612[/snapback] RCT, do you only have BBK's up front? And noise is determined by pad selection i only have big brakes in the front and i did the dics brake swap in the rear. the rear consist of sp slotted rotors, hawk pads and ss lines. and yes, noise is determined by the pad selection. let me know if you have any questions |
Jul 23, 2007 - 3:42 PM |
|
Enthusiast Joined Sep 28, '03 From Bloomington, IN Currently Offline Reputation: 0 (0%) |
QUOTE(RCTCelica @ Jul 23, 2007 - 8:21 PM) [snapback]581631[/snapback] QUOTE(SlowCelica94 @ Jul 23, 2007 - 3:52 PM) [snapback]581612[/snapback] RCT, do you only have BBK's up front? And noise is determined by pad selection i only have big brakes in the front and i did the dics brake swap in the rear. the rear consist of sp slotted rotors, hawk pads and ss lines. and yes, noise is determined by the pad selection. let me know if you have any questions So I'm guessing you're running a perportioning valve too, right? And doesn't that combo throw off the car balance? How do it effect left foot breaking and trail-breaking? -------------------- NASA/SCCA RX-7....currently under the knife
92 Civic hatch B16 - Sold 10th anniv RX-7 - RIP The Slow Celica - Sold...and then crushed crushed due to street racing. Quote from Seinfeild: George's Boss reading a magazine: "People magazine's most beautiful people. Oh and a Celica...nothin wrong with that!" |
Lo-Fi Version | Time is now: November 27th, 2024 - 5:43 AM |