Car won't start after trying to wash/paint engine, I washed and painted my engine on Thrusaday and car hasn't started Options

[Will_LT]

So basically the topic title explains my issue. Last Thrusday I sprayed my engine with an engine degreaser named Engine Bright. I made sure to cover the alrternator, distributor, battery, and any other wiring i could see, with plastic bags when i did it, then afterwards i dried off the engine and sprayed painted it. I decided not to drive the car to work that day to allow the paint to dry, but the following day was unable to start the car. when i turn the key, i hear the cranking sound, but it just doesn't start. I checked the spark plugs and they were initially wet, so i dried them but nothing. I then tried buying new ones but no luck. Through advice of some people, I've also checked the air filter and nothing appears wrong there and i also removed the distibutor cap to see if any water was there, but everything appears to be ok there as well. Bascially, what I want to know is if there's any other thing i might want to check out before i tow it over to a mechanic to have it checked out. I know my initial mistake was undertaking the task of trying to clean the engine with not knowing much about it, but i thought i had done my research and now i just wish i had left it alone.

[Dragondog]

could just be wires or paint leaked into distrebuter cap what you should do is get these parts always good the have a spark tester it plugs to ur spark wire the conects to ur spark plug then crank and see if it lights up,,,as well as a vault meter for testing ur batt