Painting Rims Question? (Please Help), Calling Experienced Wheel Painters. |
Painting Rims Question? (Please Help), Calling Experienced Wheel Painters. |
Aug 7, 2007 - 10:38 AM |
|
Enthusiast Joined Jun 13, '07 From Whitby, ON, CAN Currently Offline Reputation: 6 (100%) |
Ok i began stripping/sanding and prepping my rims for paint on the weekend.
The first rim i painted went perfect looks great and everything. After this one though it all went bad. It was hot out it could possibly be that? but what would happen is this, i primed the rim with normal primer, used a bit of cleaner to get rid of any dust/dirt from the rim then waited a bit and painted with Flat black Duplicolour rim paint. it started out alright but then i got alot of fisheyes, little circles/ bubbles in the paint. I dont know why this happend but it did so i tried to do it to the next rim, same thing again. It is really making me angry and fed up lol, Please could someone let me know if this has happend to them or if there is a way to fix it. Like i said it was just under 30 degrees outside and i was not doing it in direct sunlight could that be a factor? As well i did Prime then paint the rims, Do you need to prime with Duplicolour wheel paint. finally the cleaner i used is acetone.(sp) i dont know but could that be doing something with the paint? Please let me know Thanks for your input As well any suggestions with a way to try to make it work better? Dana This post has been edited by 94celigts: Aug 8, 2007 - 8:35 AM |
Aug 8, 2007 - 5:38 AM |
|
Enthusiast Joined Mar 14, '05 From Auckland,New Zealand Currently Offline Reputation: 1 (100%) |
not cleaned properly from the sound of things.
|
Lo-Fi Version | Time is now: December 11th, 2024 - 3:16 AM |