6G Celicas Forums

Welcome Guest ( Log In | Register )

> Installing a Head Unit, With Factory Amp
post Sep 7, 2003 - 4:34 PM
+Quote Post
1995GT



Enthusiast

Joined Aug 31, '03
From NY
Currently Offline

Reputation: 0 (0%)




This is my first time attemping something like this. I have the harness and a friend to help. But can anyone tell me how to access the wires with the factory amp? What panels do I have to remove and what do I do about the wires with the factory amp? Any help would be greatly appreciated, especially a how-to step-by-step article.
Thanks
Steve
 
Start new topic
Replies
post Sep 9, 2003 - 11:08 AM
+Quote Post
runriot95



Enthusiast
*
Joined Dec 1, '02
From Pittsburgh, PA
Currently Offline

Reputation: 0 (0%)




QUOTE
If you are just adding a headunit to the car using the stock wires all you gotta pull is the panel around the radio, cig. lighter and shifter. The biggest challange is getting the plug off the back of the stock amp.


With all due respect AudioFreak, it is not that simple - at least it wasn't with my car! The plug that you need to plug into with your wiring harness is UNDER the amp and mine was held in place by a plastic fastener. I firmly believe that you have to remove ALL the parts that I mentioned in my above post to access the factory wiring plug.

Maybe Toyota made them a little different for the different years or models but my 99GT required that I remove all those parts.

Posts in this topic


Reply to this topicStart new topic
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 25th, 2024 - 2:58 AM