FS: 6th Gen parts, front grille, strut tower cover, steering cover Options

[BloodyStupidDave...]

Following from clearing out my shed, I have the following parts for sale:


53114-20101-C0 - front grille, SS-III One remaining


64333-20150-C0 - strut tower covers. This is the plastic trim that fits over the strut towers in the boot. Toyota call this part "Cover: Package Tray". This is the version for people without the Toyota rear strut bar. Ideal if you have removed the strut bar or have an aftermarket bar and want to fabricate your own covers.

45186-20050-C0 - trim piece for the right-hand-side of the 4-spoke steering wheel. Toyota call this part "Cover: Steering".

Hazard warning switch

Clock

Mirror control without retract button (UK)

Mirror control with retract button (JDM)

OEM foglights 96-99 with brackets


Interior mirror, grey

Driver's (RHD) air vent with hole for OEM fog lights switch. This is UK spec. with the hole cut by Toyota during the manufacturing process, not some DIY job. Also, as this is genuine Toyota the clips to hold the button in place are present.

OEM 96-99 clear front bumper indicators ( 81511-20680, 81521-20660 ). One set remaining.



Aftermarket mini halogen foglights - brand new, never fitted
http://i125.photobucket.com/albums/p73/md84419/DSCF3075.jpg
The bracket looks silver and rusty in that shot. I can assure you it isn't, that is just a reflection. The bracket is actually gloss black.


Original leather gear gaiter for manual shift.

Plastic trim that fits around the gear gaiter. For manual shift, RHD.

Original leather gear knob for manual shift. Average to good condition for age.

Rubber seal bumper to bonnet.

Metal retainer for rubber seal above.

I probably have some other bits also - I'll update this thread as I find stuff.

This post has been edited by BloodyStupidDavey: Dec 16, 2007 - 7:53 AM

[yyet]

how much for the 6th gen foglights? not the aftermarket ones