![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Jan 11, '07 From Fort Lauderdale, FL Currently Offline Reputation: 0 (0%) ![]() |
so I bought these white beauties to be put on my white Celi and waiting for them to get to me...yes i know..I am in the minority of Celi fans that like white on white...but to be fair..I only like white rims as long as they have a polished lip/deepdish look on them (plain white is ugly IMO)...
so my Question is this..the factory rims for the Celi I have are the standard 15 x 7 with offset 45 imprinted on the rim...these white ones are 17 x 7 so the dimensions are not a problem, but the offset is 40... If i want to get the same offset as the factory ones..all i have to do is buy 5mm spacers right? btw..i plan on removing the namebrand sticker on the rim ![]() This post has been edited by gabyz: Aug 21, 2007 - 9:16 PM -------------------- |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) ![]() |
Could be. I am not sure. I have never seen any literature on the stock offset. I think we, as a community, have just taken it for granted that the stock offset was in the 38-40 range. Realize that we are talking one half of a centimeter here. On a 7 inch wide wheel, it just doesn't matter for rubbing purposes.
-------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
![]() ![]() |
Lo-Fi Version | Time is now: February 19th, 2025 - 9:31 PM |