What am I missing?? Options

[Ve1Ls1dEvolutioN]

sup guys....i need help...i installed KYB GR-2 shocks in the front with Eibach Pro-Kit...when i installed the front the springs didn't line up with the strut mount and when i turn the wheel i hear the clunking sound....

am I missing something?? i previously had KONI with Ground Control...threw out all the stuff from the previous OEM strut assembly...what goes after the spring?? is there something between the spring and the strut mount so the wheel wont clunk??

ANY HELP/ADVICE WOULD BE APRECIATED
THANX

This post has been edited by Ve1Ls1dEvolutioN: Sep 1, 2007 - 9:58 PM

[LewFX]

did you put that rubber lining over the spring before it goes on the top

[eggman40]

did you put that rubber lining over the spring before it goes on the top

x2 also did you put the bump stops back on to the shock as well???? you could cut the bump stops a little to aid in lowering.





This post has been edited by eggman40: Sep 5, 2007 - 11:08 AM