F/S: 95 GT 5 spd parts or project car, SOLD Options

[eclipse_04a]

Car has minor hail damage on top and passenger side (look for distortions in reflections) major damage to the front drivers fender, and medium damage to passenger rear quarter. each high beam has a hole from rocks, rear bumper has a cut in it. I am the second owner, have owned it for almost 3 years, car sat in storage for 3+ years before I bought it. I have the black interior plastic for the trunk. Haynes manual included.
It does run, but it burns and leaks some oil. I don't believe that it's the head gasket, there is no white smoke . Needs a new clutch a tires minimum. Has new KYB struts, mounts and boots on all four corners (almost asking price alone) with about 300 miles on them. Interior has a few cigarette burns from first owner. It doesn't smell like smoke at all (hasn't since about a week after I got the car.) I also have a set of Konig Verdicts 17's that will go with it (also need tires) They are in decent shape. Enough from me for now, here are pictures. I wanted to take more, but my camera died, so if I didnt get anything you want to see let me know. Clean Title as well

Car is located in Menomonie WI (54751) about 40 min. east of the Twin Cities (30 min from Eau Claire, WI)

$700 obo

I will not part it out as I don't have the time or the place. Please don't ask. If you want to buy it and part it out for a profit go for it.

Its just been sitting around for the last month as I bought an RSX. It was either time to put money into it or get something else.

This post has been edited by eclipse_04a: Sep 6, 2007 - 11:00 PM

[TRDcelica96]

would you deliver this car to ohio?

[eclipse_04a]

would you deliver this car to ohio?

I figure a 2 hour radius is about as far as I could go in an evening. Any delivery that I do would have gas paid for by the buyer. Where in ohio are you? It may be possible to work something out.



Other stuff:

None of the rust is far enough to have weakened the metal, I pushed fairly hard on most of the spots and none of them flexed at all, so it would just be sanding it down and smoothing it off with filler.

The ash tray was cut out and replaced with a part I made on a rapid prototyper. it was designed to hold my cell phone on top, and the angled part lifts off for a place to keep my blue tooth headset. Its abs plastic painted flat black, and fits in pretty well other than having a different texture.

Feel free to ask for other pics if you don't see something you want to, or want a close up of something.

[TRDcelica96]

would you deliver this car to ohio?

I figure a 2 hour radius is about as far as I could go in an evening. Any delivery that I do would have gas paid for by the buyer. Where in ohio are you? It may be possible to work something out.



Other stuff:

None of the rust is far enough to have weakened the metal, I pushed fairly hard on most of the spots and none of them flexed at all, so it would just be sanding it down and smoothing it off with filler.

The ash tray was cut out and replaced with a part I made on a rapid prototyper. it was designed to hold my cell phone on top, and the angled part lifts off for a place to keep my blue tooth headset. Its abs plastic painted flat black, and fits in pretty well other than having a different texture.

Feel free to ask for other pics if you don't see something you want to, or want a close up of something.

im in Akron.. thats about 45 minuts south of cleveland...


and the second celica i just got is to fix paint and sell local for what its worth and its a auto and a coupe.. i really am not into that.. i want a hatch that i can play around with and i really want a curren front end hatch but i dont want to do that to mine