 wide wheels/tires rubbing ... |
 Aug 9, 2007 - 12:23 PM
|
 
|
 Enthusiast  Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%)  |
just wanted to get some ideas on what people have done to eliminate the rubbing in the rear when using wide rims/tires or spacers. i have 17x7.5 45 offset rims with 15mm spacers. as soon as i put them on, the rears would rub like crazy on the inner lip of the rear fender. i cut slits into that lip and used vice grips to bend the lip up. this helped a lot and got rid of most of the rubbing, however it still does rub ever once in a while. any ideas?
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
 |
Replies
|
Sep 6, 2007 - 11:28 PM
|
|
 Enthusiast Joined Jan 17, '07 From (CA) orange county Currently Offline Reputation: 0 (0%) |
i use to rub cause my car is lowered but i just used a heat gun and a rubber mallet to solve the problem and im running 205 50 16's plus 46 offset.. but now i put on 30mm spacers.. so now im at +16 heres a before picture with out spacers and then i dont know if you can notice with the after picture cause its not really focused on the wheels
before   after   This post has been edited by prowzee: Sep 6, 2007 - 11:29 PM |
Posts in this topic
lagos wide wheels/tires rubbing ... Aug 9, 2007 - 12:23 PM
Harold_Fastwaker Rubber mallet to knock the inner liner up higher a... Aug 9, 2007 - 12:38 PM 95CelicaST Replace the 15mm spacer with a 10mm spacer? Aug 9, 2007 - 12:51 PM lagos QUOTE(Harold_Fastwaker @ Aug 9, 2007 - 1... Aug 9, 2007 - 1:50 PM OrbitalGT95 lower offset..tehehe Aug 9, 2007 - 2:30 PM lagos what about fender rolling. has anyone tried it on ... Aug 9, 2007 - 2:40 PM devilsden97 so your offset is 30 art?
what size tires are on ... Aug 9, 2007 - 2:48 PM lagos 17x7.5 45 offset rims with 15mm spacers and 225-45... Aug 9, 2007 - 2:57 PM devilsden97 so u have a total offset of 30 with 225s
that why... Aug 9, 2007 - 3:10 PM lagos my offset might be 30, but the rim width is only 7... Aug 9, 2007 - 3:20 PM devilsden97 IIRC the smaller your offset, the smaller your off... Aug 9, 2007 - 3:28 PM jesterwr217 my front and rear have been rolled Aug 9, 2007 - 3:32 PM devilsden97 ^photos! Aug 9, 2007 - 3:36 PM jdg371 bring out the baseball bat! Aug 9, 2007 - 7:11 PM lagos QUOTE(jesterwr217 @ Aug 9, 2007 - 4... Aug 9, 2007 - 7:42 PM
jesterwr217 QUOTE(lagos @ Aug 9, 2007 - 8:42 PM)... Aug 10, 2007 - 12:16 AM bufferdan Wrap a towel around a bat and jack up the car enou... Aug 10, 2007 - 12:37 PM OrbitalGT95 You could always try 1. buying camber plates and a... Aug 12, 2007 - 11:40 AM Kadett I had the same problem.
I have 225/40/18 GoodYear... Aug 12, 2007 - 12:21 PM lagos yeah i think ride height and suspension has a lot ... Aug 12, 2007 - 12:44 PM jesterwr217 ok heres the deal lol i guess i lied its just my f... Aug 18, 2007 - 11:46 AM jesterwr217 o and if your lowered get rid of your wheel well p... Aug 18, 2007 - 12:18 PM eggman40 I have a fender rolling tool if anyone else has a ... Sep 6, 2007 - 9:37 PM lagos just an update. i ended up doing a bit more bendi... Sep 7, 2007 - 1:26 PM Daftboy prowee do you have any better pictures of the car ... Sep 7, 2007 - 1:40 PM lagos this one shows them off perfectly... Sep 7, 2007 - 3:54 PM prowzee uhh.. ill try to take some photos on saturday and ... Sep 8, 2007 - 5:21 AM |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 2nd, 2024 - 8:04 AM |