WTB: Oil feed line for 3sgte, I made a boo boo Options

[1bwilson]

So I let my brother cut my hard line for my 5sfte project. I pointed at exactly where I wanted him to cut it so that I would have the full length of the stock hard line before I had to weld the AN fitting. Well he cut the wrong end and not only is it on the wrong side but he cut it so far down and close to the oil return that Im 90% sure the 2 are to close to get a full weld around the line. So im in a bind, I cant continue the install without the feed line. Anyone got a spare stitting around I can buy off ya? I cant remember what I paid for the first so make your own price. Thanks.

Again WTB: Stock oil feed line from a 3sgte, the line that goes from the turbo and includes the oil return line.

This post has been edited by 1bwilson: Sep 6, 2007 - 5:51 PM

[x_itchy_b_x]

how about a KO racing adapter then a ebay oil line that you dont need to weld an -AN fitting to.

http://www.koracing.net/viewproduct.php?fo...amp;product=239
20 bucks for the fitting

http://cgi.ebay.com/ebaymotors/EARLS-3-AN-...sspagenameZWDVW
20 for the oil line.

This post has been edited by x_itchy_b_x: Sep 7, 2007 - 4:02 PM